Описание

"Подшипники из инновационных высокоэффективных пластмасс и полимеров, срок службы которых легко рассчитать, помогают клиентам компании igus, основанной в 1964 году в г. Кельн, Германия, повысить эффективность своей работы и сократить операционные расходы. Производственные мощности компании, на которых производятся как стандартные промышленные подшипники, так и подшипники по индивидуальным техническим заданиям, расположены в штате Род-Айленд, США.1. All-round mounting: with KMA mounting bracket 2. Economical: Through optimal utilisation of installation space 3. Easy filling: inner cross-section completely accessible 4. Precise division: notched crossbar with scale 5. Short assembly time: flip open in inner and outer radius at both ends 6. Without camber: NC version by reversing the outer link 7. Chip protection: Very close-tight end cap and bottoms 8. High stability: High forces through ""undercut"" design 9. Straight running: inner/outer linkE4.64L Series is suitable for the following types of applications: Standing applications: ? 8 m Horizontal: Unsupported applications ? 4 m, Hanging applications ? 80 m, side-mounted unsupported application ? 2 m When to use Series E4.64L
  • If a light, cost-effective e-chain® is required with 48 mm inner height and high dynamics
  • Lower weight possible at higher dynamics
  • Inner width up to 150 mm
  • For unsupported lengths up to 3.75 m and fill weights up to 26 kg/m
  • If an optimised ratio of inner to outer dimensions by means of thinner outer links and an optimised opening crossbar geometry is required
  • Also suitable for side-mounted, standing and hanging applications
When not to use Series E4.64L
  • When the e-chain® needs to be extremely quiet (=46 db(A)) and low-vibration Series E6.40
  • If even higher strength is required Series E4.42
  • In the case of long travel distances with gliding Series E4.42
  • If a compromise for more cost-effective price/strength can be made Series 3400/3500
"''