Описание

"Подшипники из инновационных высокоэффективных пластмасс и полимеров, срок службы которых легко рассчитать, помогают клиентам компании igus, основанной в 1964 году в г. Кельн, Германия, повысить эффективность своей работы и сократить операционные расходы. Производственные мощности компании, на которых производятся как стандартные промышленные подшипники, так и подшипники по индивидуальным техническим заданиям, расположены в штате Род-Айленд, США.1. Straight running due to inner/outer link design 2. Low-noise due to built-in brake in the stop-dogs 3. The undercut design ensures very high rigidity and load capacity 4. 15% more tensile strength (compared to best old E4 series), better unsupported length due to improved vertical stop-dog system 5. New opening crossbar available for faster installation/removal 385.X. Q 6. New interior separation system increases the service life of your cables by up to factor 4 7. NC ""No Camber"" version possible simply by rotating the outer link, no rework required 8. Crossbars can be removed on both sides 9. Lid for e-tube can be opened and removed 10. Cable-friendly wide plastic crossbars 11. Improved gliding surfaces – long service life 12. Smooth outer contours, less dirt adhesion 13. Strain relief separator can be fitted in the mounting bracketR4.32 Series is suitable for the following types of applications: Vertical: hanging applications ? 80 m, standing applications ? 5 m horizontal: unsupported applications ? 3,3 m, gliding applications ? 200 m rotary motions: rotating applications possible, may require machining (machining rework is always required from rotation angles of 180°) When to use Series R4.32
  • When a robust e-chain®/e-tube with 32 mm inner height is required
  • If an inner width up to 400 mm is required
  • For unsupported lengths up to 3,25 m and fill weights up to 15 kg/m
  • For long travels up to 200 m
  • Also suitable for side-mounted, standing and hanging applications
  • If the ability to have multiple options and attachment parts is required
When not to use Series R4.32
  • When an extremely low vibration e-chain® is required. E6.35 series
  • When e-chain® are to be used in the cleanroom (ISO Class 1) Series E6.35
  • When a higher inner height is required with the same exterior dimensions Series E4.38L
  • If opening on one side is sufficient Series 2600/2650/2680/2700
"''